Inicio Productos Carrito 0
Consulte nuestros mejores precios en Ubiquiti y Mikrotik

Switch Hikvision DS-3E1526P-EI/M (230W)

Inicio - Conectividad - Switchs - Hikvision - Switch Hikvision DS-3E1526P-EI/M (230W)
Hikvision DS-3E1526P-EI/M

$268.114
Ver medios de pago
Entregas para el CP: Cambiar CP
Medios de envío
No sé mi código postal
Descripción

logo

DS-3E1526P-EI/M

Los switches administrables inteligentes son desarrollados por Hikvision y ofrecen una gestion y mantenimiento sencillos. Puede implementar, supervisar y ampliar facilmente su sistema de videoseguridad en cualquier momento y desde cualquier lugar mediante nuestras plataformas de software.

 

Puede visualizar la topologia de la red, supervisar el estado de la red y recibir alarmas de los dispositivos en tiempo real, lo que reduce significativamente los costos de operacion y mantenimiento de la red.

  • 24 puertos Gigabit PoE RJ45, 1 puerto Gigabit RJ45, 1 puerto de fibra óptica Gigabit

  • Presupuesto total de energía PoE 230 W

  • Gestión unificada de la nube para sistemas de seguridad

  • Topología de red a tu alcance

  • Solución de problemas a distancia

  • Gestión de topología visualizada

  • Transmisión PoE de largo alcance de hasta 300 m

  • Protección contra sobretensiones de 6 kV

--------------------------------------------------------------------------------------------------------

Especificaciones

General

  • Shell: Metal material

  • Net Weight: 2.96 kg (6.52 lb)

  • Gross Weight: 3.2 kg (7.05 lb)

  • Dimensions (W × H × D): 440.0 mm × 220.8 mm × 44.0 mm (17.32'' × 8.69'' × 1.73'')

  • Operating Temperature: 0 °C to 45 °C (0 °F to 113 °F)

  • Storage Temperature: -40 °C to 85 °C (-40 °F to 185 °F)

  • Operating Humidity: 5% to 95% (no condensation)

  • Relative Humidity: 5% to 95% (no condensation)

  • Power Supply: 100~240 V AC, 50/60 Hz, Max. 4 A

  • Installation Mode: Rack (equipped with mounting ears)

  • Max. Power Consumption: 250 W

  • Power Consumption in Idle: 30 W

  • Surge Protection: 6 kV

Network Parameters

  • Ports: 24 × Gigabit PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port

  • MAC Address Table: 8 K

  • Switching Capacity: 56 Gbps

  • Packet Forwarding Rate: 41.66 Mpps

  • Internal Cache: 4.1 Mbits

PoE Power Supply

  • PoE Standard: IEEE 802.3af,IEEE 802.3at

  • PoE Power Pin: 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)

  • PoE Port: PoE: Ports 1 to 24

  • Max. Port Power: 30 W

  • PoE Power Budget: 230 W

Software Function

  • Long Range: Ports 1 to 24: up to 300 m. Long range performance may vary depend on camera model or cable condition.

  • Port Isolation: Ports 1 to 24: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

  • PoE Watchdog: Ports 1 to 24: auto detect and restart the cameras that do not respond.

  • Link Aggregation: Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation groups.

  • Loop Prevention: Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.

  • VLAN: VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN.

HPP

  • HPP: Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.

System Maintenance

  • System Maintenance: Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Support 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating.

Approval

  • EMC: CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)

  • Safety: CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)

  • Chemistry: CE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)